Gf07 2g Strong Magnetic Gps Tracker
1. Appearance size: 3.5cm*2.0cm*1.4cm(L*W*H)
2. Charging input InputAC110－220V50/60Hz
3. Charging output: OutputDC5.0V 300-500mA
4. Machine battery: 3.7V 400mAh Li-ion battery
5. Standby time: 12 days. Working time 4-6 days
6. Expansion card: Mini TF card
7. Continuous call: 150-180 minutes
8. Network standard: GSM/GPRS
9. Storage temperature: -40°C to +85°C
10. Working temperature -20°Cto +55°C
11. Humidity range 5%-95% non-condensing
12.GPRS: Upload60, TCP/IP
14. Working voltage: 3.4-4.2V DC
15. Standby current: ≈2.5mA
16. Turn on the voice control current: ≈30mA
17. Talking current: ≈150mA
18. GSM positioning time: 25 seconds
19. Basic parameters: frequency band GSM850/900/1800/1900MHZ
20.Product name:Mini gf07 2G strong magnetic GPS tracker
Support remote operation of mobile phone. Function: record, sound monitoring, GPS track, machine state, restart. Compact size, easy to carry,not easy to find when placed.(The GF-07 tracker is LBS positioning, and only supports 2G network,the position accuracy depends on your local LBS signal)
1.Mini gf07 2G strong magnetic GPS tracker,Precise positioning, two pieces of strong magnetic adsorption without assembly, long time standby, very convenient.
2.Widely compatible, you can use mobile phones, tablets, computers to view, accurate rated positions can be viewed anytime, anywhere.
3.When the surrounding sound of the locator is greater than 60 decibels, mini gf07 2G strong magnetic GPS tracker will automatically call the set mobile phone number, accurately display the location, and be more secure against theft.
4.The flat map and the street view map can be switched at will, which is convenient for positioning and tracking, and it is easier to find a car and find a person.
5.No hands-on instructions are required, and it will automatically continue recording when someone is talking, and the device will not make any sound during the recording process.
1. The host cannot be connected
Answer: You must insert the SIM phone card and turn on the phone to enable the phone signal, so you only need to turn off the machine and then turn it on again. Also, your phone card is not in the service area and there is no signal.
2. TF memory card cannot be stored?
Answer: First check whether the TF memory card is wrong. If the TF card is ok, you can format the TF memory card and try again.
Answer: To charge, you need to insert a GSM card, if you can’t charge it without it.
4.What is the master phone?
Answer: It is the mobile phone that you need to use it to monitor the anti-theft alarm.
When the power of the alarm locator is low (the power is below 5%), please charge it in time. If the battery is in a state of power loss for a long time, it will inevitably cause the battery to be deeply discharged, which will affect the battery performance and life. In severe cases, the battery cannot be charged. If the alarm locator is not in use, please charge the battery to 60%---80%, disconnect the power of the locator, and store it. If the locator is not used for a long time (three months), please use the locator regularly Replenish the battery to protect the battery. For your better use of this machine, please read carefully and operate according to the above, thank you!